LO 1: Install Network Cables

this unit covers the outcomes required in setting-up computers networks for LANs and small-office home-office (SOHO) systems. It consists of competencies to install network cables, set network configuration, set router/Wi-Fi/ wireless access point/repeater configuration as well as to inspect and test the configured computer networks

1.1 Cable routes are determined and planned in accordance 
with network design and actual installation site.
1.2 Network materials necessary to complete the work are 
identified and obtained in accordance with established 
procedures and checked against systems requirements 
1.3 Tools, equipment and testing devices needed to carry 
out the installation work are obtained in accordance with 
established procedures and checked for correct 
operation and safety 
1.4 Appropriate personal protective equipment is used 
and OHS policies and procedures are followed
1.5 Copper cable splicing is performed based on Electronic 
Industries Alliance/Telecommunications Industry 
Association (EIA/TIA) standards
1.6 Network cables and cable raceway are installed in 
accordance with established procedures and installation 
requirements
1.7 Installation work is performed and is checked to ensure 
no unnecessary damage has occurred and complies with 
requirements
1.8 OHS standards and 5S principles are followed according 
to enterprise requirements
1.9 Excess components and materials are disposed of based on 
WEEE directives and 3Rs waste management program